Sizing

NEED A HAND? ENQUIRE HERE

A PRECISE FIT IS ESSENTIAL, OUR SIZING GUIDANCE BELOW HELPS ENSURE YOU GET IT RIGHT.
FOR SPECIFIC GARMENT SIZING, REFER TO THE PRODUCT PAGE.

Measuring tips:

Lay the collar flat on a surface with the shirt unbuttoned and face-up. Measure from the underside of the collar button to the outside of the buttonhole.

Measuring tips:

Lay the shirt flat on a surface, with the shirt buttoned up. Measure from armpit seam to armpit seam, then multiply by two.

Measuring tips:

Measure from the seam at the crest of the shoulder to the tip of the cuff, along the outside of the arm.

Measuring tips:

Lay the shirt flat on a surface, with the shirt buttoned up. Measure from narrowest point to point of the waist of the garment.

Measuring tips:

Lay the garment flat and measure from the base of the collar seam at the back of the neck to the hem at the bottom of the garment.

Measuring tips:

Lay the shirt flat on a surface, with the shirt buttoned up. Measure from the widest part of the hip, striaght across to the other point. Multiply this measurement by two.

Measuring tips:

Lay the garment flat on a surface. Measure from armpit seam to armpit seam, then multiply by two.

Measuring tips:

Measure from the centre of the back neck to the tip of the cuff, along the outside of the arm.

Measuring tips:

Lay the garment flat, face down, and measure from the collar to the hem at the bottom, straight down the centre of the garment.

Measuring tips:

Lay the garment flat on a surface. Measure from armpit seam to armpit seam, then multiply by two

Measuring tips:

Measure from the seam at the crest of the shoulder to the tip of the cuff, along the outside of the arm.

Measuring tips:

WIth the jacket hanging on a structured coat hanger, measure across the back from shoulder seam to shoulder seam at the points where the front, back and sleeve pieces converge.

 

Measuring tips:

Lay the garment on a flat surface, then measure straight across the narrowest point on the abdomen. Multiply this value by two.

Measuring tips:

With the jacket hanging on a structured coat hanger, measure from the base of the collar seam at the back of the neck to the hem at the bottom of the garment along the back centre seam.

Measuring tips:

Lay your trousers flat on a surface, then measure from one outside edge of the waistband to the other. Multiply this value by two.

Measuring tips:

Lay the trouser flat, then measure from the seam at the for to the centre back of the waistband.

 

Measuring tips:

Lay the trouser flat on a surface then, starting from the seam at the fork of the trouser, measure straight down to the hem. Note that we provide measurements for the unhemmed length of our trousers. A plain hem will require around 4cm to 5cm, while a cuff will require 8cm to 10cm.

Measuring tips:

Lay your trousers flat on a surface, then measure across the area of the hip, from one side to the other. Multiply this value by two.

Measuring tips:

Lay your sock flat and measure straight from the tip of the toe to the back of the heel.

Measuring tips:

Lay your belt flat and measure from the base of the buckle arm to the outermost hole.

Measuring tips:

Lay your belt flat and measure from the base of the buckle arm to the outermost hole.

Measuring tips:

Measure your glove flat across the widest point of the palm. Multiply this value by two.

Measuring tips:

Measure around the inside of that hat, at the base, just before the brim.

Measuring tips:

Drake's bow ties are adjustable. They fit 15 to 17.5 collar sizes

Still not sure?

Our staff can provide detailed information for any of our products.

MAKE ENQUIRY

Browse all Shirts